MIPI CSI Camera Connectors & FPC Sourcing in China
2 resources tagged with "Mipi Csi"
MIPI CSI is the serial interface that carries camera data from an image sensor to an SoC, and in most China-made modules it terminates in a fine-pitch FPC connector — typically 0.5mm pitch, 15 to 24 pins, ZIF (zero insertion force) lock. The recurring sourcing trap is non-standard pinouts: two factories selling a '15-pin 0.5mm CSI FPC' can have completely different lane and power assignments, so a board that worked on one batch fails on the next. We check pinout against the customer's reference schematic before any tooling, not after.
When you source MIPI CSI hardware you are usually buying the connector plus the FPC cable as a matched pair; the common pitfall is assuming pin order is standardized when it is vendor-specific. We verify contact pitch, lock type (ZIF vs LIF), and the exact pin map against your schematic.
Wiki (2)
FAQ
What pitch and pin count do MIPI CSI camera FPC connectors use?
Most are 0.5mm pitch with 15, 22, or 24 pins for 1- to 4-lane configs. Below 0.5mm (0.4mm) exists but is harder to hand-assemble and rework, so it is mainly used in space-constrained modules.
Why does a CSI cable from a new supplier stop working?
Almost always a pinout mismatch. 'MIPI CSI 15-pin' is not a guaranteed standard pin order — lane, clock, and power pins vary by vendor. Always compare the supplier's pinout drawing to your reference before ordering.
What MOQ should I expect for a custom CSI FPC connector?
Standard catalog connectors ship from stock with no real MOQ. A custom FPC cable with a specific length and pinout typically starts around 1,000 to 5,000 pieces and takes 2 to 3 weeks for first samples.
Related Topics
Have a sourcing project in mind?
Tell us what you need. We respond within 24 hours, including weekends.