FPC Connectors From China: Pitch, ZIF & MIPI
2 resources tagged with "Fpc Connector"
FPC connectors are the fine-pitch sockets that mate a flex cable to a board — the spot where camera modules, displays, and compact devices most often fail on assembly. From China you can source standard 0.5-1.25mm pitch FPC/FFC connectors in ZIF and LIF lock styles, plus MIPI CSI/DSI camera and display connectors with specific pin counts and lane configs. The recurring trap is a non-standard pinout or a contact rated for too few actuation cycles for a product that gets opened and reworked repeatedly.
When you source FPC connectors, match pitch, contact count, contact-side (top vs bottom), and the flex cable's stiffener thickness exactly, because a near-match still fails to latch or makes intermittent contact. A common pitfall is buying on pitch alone and discovering the lock type or actuation cycle life does not fit the assembly process.
Wiki (2)
FAQ
What is the difference between ZIF and LIF FPC connectors?
ZIF (zero insertion force) uses a flip or slide actuator so the flex inserts with no force, then clamps; LIF (low insertion force) relies on friction. ZIF is gentler on the flex and preferred for fine pitch and rework.
How do I match an FPC connector to my flex cable?
Match pitch, pin count, contact side (top or bottom contact), and the cable's stiffener thickness. For MIPI CSI/DSI, also confirm lane count and pinout, since vendors sometimes ship non-standard pin assignments.
How many insertion cycles do these connectors last?
Many low-cost FPC connectors are rated for only 10-30 mating cycles. If your product is opened or reworked often, specify a higher actuation cycle rating up front rather than discovering field failures later.
Related Topics
Have a sourcing project in mind?
Tell us what you need. We respond within 24 hours, including weekends.