Quality Inspection for China Electronics Orders
6 resources tagged with "Inspection"
Inspection on a China electronics order spans incoming material checks, in-line process control, and a pre-shipment AQL inspection — typically sampled to ISO 2859-1 (AQL 2.5 for major, 4.0 for minor defects) before the goods leave the factory. For electronics specifically, document verification matters as much as visual checks: a UN 38.3 or IEC 62133 battery certificate has to be traced to an accredited lab and matched to your actual cells, and an FCC grantee ID can be looked up in the public database to confirm the real maker. Across the case examples here, three-stage inspection consistently held defect rates in the 0.4–0.6% range on consumer electronics runs.
When we inspect, the highest-value step for electronics is verifying that certificates and FCC/UN test reports correspond to the exact product being shipped — paperwork fraud is more common and more costly than cosmetic defects, since it surfaces at customs or in the field.
Guides (1)
Cases (5)
FAQ
What AQL level should I use for electronics inspection?
A common starting point is ISO 2859-1 at AQL 2.5 for major defects and 4.0 for minor, tightened for safety-critical functions. Functional and safety failures should be treated as critical with zero or near-zero acceptance.
How do I verify a battery certificate during inspection?
Confirm the UN 38.3 or IEC 62133 report was issued by an accredited lab, that the cell model and capacity match your actual parts, and that the report isn't a generic template reused across products. Mismatches block air freight and customs.
When should inspection happen in the production timeline?
Use at least incoming-material and pre-shipment stages, with in-line checks for higher-risk products. Pre-shipment alone catches finished defects but not process problems already built into the units.
Related Topics
Have a sourcing project in mind?
Tell us what you need. We respond within 24 hours, including weekends.