Cărucior Pentru Bebeluși (Scaun Reversibil, Cadru Aluminiu)

EN 1888-1:2018: Standardul Obligatoriu Actualizat al UE

EN 1888-1:2018 replaced the previous EN 1888:2012 standard for wheeled child conveyances. It became mandatory for EU market compliance in 2020. The key changes include more stringent stability requirements (topple test with full load including parent bag hook), updated restraint system strength tests for the 5-point harness, and revised braking requirements. Our factory audit service verifies that the factory’s certification document references EN 1888-1:2018 explicitly — strollers certified only under EN 1888:2012 do not meet current EU requirements.

Brake mechanism retention is a critical safety function tested per EN 1888-1 Section 5.7: the parking brake must hold the loaded stroller (with maximum child weight + shopping basket load) on a 10° slope. Test this physically during sample inspection — park the stroller on a 10° incline with appropriate weight and verify it does not roll. Chinese factories sometimes use plastic brake clips that work correctly when new but fatigue and lose retention force after 500 cycles of use. Specify minimum brake retention force of 50 N in your purchase order. Our sourcing service can include brake retention testing and frame weld inspection as part of the pre-production sample evaluation.

Calitatea Sudurii Cadrului și Ambalarea pentru Export

Aluminum frame welds on strollers are the primary structural concern. TIG welds should be visually inspected for undercut, porosity, and incomplete fusion — look particularly at the fold joint weld (highest stress point) and the backrest recline mechanism mounting points. For EU market strollers, EN 1888-1 requires a frame strength test: apply 750 N horizontal load to the handlebar for 10 minutes without permanent deformation. Request this test result from the factory.

Export packaging must protect four specific vulnerable points during container transit: handlebar grip ends (scratch easily), wheel axle protrusions (pierce carton walls), frame fold joint (can open under lateral pressure), and canopy wire frame (bends permanently if compressed). Our quality inspection service includes packaging integrity testing — drop-testing cartons corner-first from 70cm height and inspecting for damage to verify your export packaging design before container loading.