SD & microSD Card Connectors: China Sourcing Reference
1 resources tagged with "Sd Connector"
SD and microSD card connectors are sourced from China by the reel, and the two things that decide reliability are the actuation type and the rated mating cycle life — push-push (spring eject) versus push-pull, with quality parts rated to 5,000–10,000 insertions. The SMD footprint and tray height vary between push-push and combo SIM/SD types, so a footprint mismatch is a common board respin trigger. Unit prices run a few cents at volume, but the cheap end is where contact plating thins out and failure modes appear early.
When you source SD connectors, the failure modes to watch are intermittent contact from worn gold plating and stuck eject mechanisms on push-push parts. The common pitfall is buying on price alone — confirm the gold-plating thickness on the contacts (often quoted in micro-inches) and the rated mating cycles, since both directly set field-return rates.
Wiki (1)
FAQ
What's the difference between push-push and push-pull SD connectors?
Push-push uses a spring mechanism so the card ejects with a second press; push-pull requires pulling the card out by hand. Push-push is more user-friendly but has a spring that can wear, so it carries a defined mating-cycle rating to check against your use case.
How do I avoid a footprint mismatch?
Request the exact connector's mechanical drawing and 3D model before laying out the PCB, and confirm whether it's a standalone SD slot or a combo SIM/SD type, since the pinout and footprint differ. Verify the part number on the production reel matches the one you designed around.
Related Topics
Have a sourcing project in mind?
Tell us what you need. We respond within 24 hours, including weekends.