IEC 60947-7-1 DIN Rail Terminal Blocks
1 resources tagged with "Iec 60947 7 1"
IEC 60947-7-1 is the standard for terminal blocks for copper conductors, covering DIN rail screw, cage clamp, and spring clamp types sourced heavily from China. It defines rated voltage, current, conductor cross-section, and the clamping-unit test regime; the parallel UL 508 listing matters for North American panels. Pitch variants (5.2mm, 6.2mm, etc.) and rated current must match your conductor gauge, and a cheap clamp that fails the conductor pull-out test is a fire risk in the field.
When sourcing terminal blocks, watch for parts marked '60947-7-1 compatible' with no test report and undersized current ratings. We verify the clamping spec against the conductor size, check UL 508 listing where the panel ships to the US, and confirm flammability rating (UL 94 V-0) on the housing.
Wiki (1)
FAQ
What does IEC 60947-7-1 cover for terminal blocks?
It specifies rated voltage and current, accepted conductor cross-sections, clamping reliability, and test requirements for terminal blocks using copper conductors. It's the baseline spec for DIN rail terminals in IEC markets.
Do I also need UL 508 for the US market?
For panels destined for North America, UL 508 (or UL 1059) listing on the terminal block is usually expected. IEC 60947-7-1 alone may not satisfy a US panel inspection, so confirm dual marking.
Related Topics
Have a sourcing project in mind?
Tell us what you need. We respond within 24 hours, including weekends.