DC Plug Power Connectors from China
1 resources tagged with "Dc Plug"
A DC plug is the male barrel connector on a power lead that inserts into a device's DC jack — the cable-side half of the coaxial power pair. The dominant sourcing error is the 5.5/2.1mm versus 5.5/2.5mm inner-pin diameter mismatch, since the two are visually identical but a 2.1mm plug arcs loose in a 2.5mm jack. You also choose straight versus right-angle bodies, standard versus locking, and the wire gauge and current rating that match your supply.
When you source DC plugs, confirm the exact outer/inner diameter, the polarity convention (center-positive is standard but not universal), and the current rating against the cable gauge. The common pitfall is reversed polarity or under-gauged wire on a cheap molded plug, both of which can destroy the powered device.
Wiki (1)
FAQ
Is center-positive standard on DC plugs?
Center-positive is the common default for most consumer electronics, but it is not universal — some equipment uses center-negative. Always confirm the polarity in the spec and on a sample before bulk ordering.
What diameter DC plug should I order?
Match the device's jack — usually 5.5/2.1mm or 5.5/2.5mm outer/inner. They look the same but don't mate reliably across sizes, so verify both dimensions against the matching jack.
Related Topics
Have a sourcing project in mind?
Tell us what you need. We respond within 24 hours, including weekends.