10 Solar Street Light Manufacturers in China (2026)

Search for “solar street light manufacturers in China” and the results split into two very different supply bases: fixture specialists around Zhongshan and Guzhen who excel at LED housings and optics, and system integrators around Yangzhou and Jiangsu who assemble complete solar street lights for municipal and export projects. Knowing which cluster a factory belongs to tells you a lot about what it actually does well.

Most buyers landing on this page are municipal contractors, Africa or Middle East distributors, or procurement teams running government tenders. They are not looking for a single garden lamp; they need hundreds or thousands of units with consistent battery chemistry, honest panel ratings, and paperwork that clears customs. The real risk in this category is not the LED — it is the battery. The most common fraud we see is a supplier claiming a LiFePO4 battery while shipping ternary lithium or recycled cells. That mislabeling affects cycle life, fire safety, and whether the shipment can even be air-freighted without a proper UN 38.3 report.

This list covers ten manufacturers that are genuinely active in solar street lighting. I have sorted them by what they do best, not by who pays the most for marketing. The price band across the category sits at roughly $25–$120 per unit depending on wattage and battery configuration, and the two dominant production clusters are Zhongshan/Guzhen in Guangdong for fixtures and Jiangsu/Yangzhou for complete solar street light systems.

Quick comparison

The table above is a starting filter. The profiles below explain where each factory actually adds value and where it does not.

How we evaluate

We score solar street light factories on six points that matter on the ground:

1. Battery chemistry and documentation. LiFePO4 is the safer, longer-life choice for outdoor solar. We ask for cell photographs, battery test reports, and UN 38.3 transport documentation from the UN dangerous goods manual. Any factory that cannot produce these is disqualified for certified or municipal work.
2. Panel honesty. A 100 W monocrystalline panel should deliver a known open-circuit voltage and short-circuit current. We check datasheet values against physical samples or third-party reports.
3. Housing and ingress protection. IP65 and IK08 are the baseline for outdoor public lighting. These are IEC 60529 and IEC 62262 test ratings, evidenced in the EN 60598 luminaire safety report — a CE Declaration of Conformity does not by itself prove them. A factory should show the actual test reports, not generic marketing claims.
4. Production scale vs. flexibility. Large factories like NEWSKY POWER can handle volume but may push standard SKUs. Smaller Yangzhou integrators can customize faster but may lack export documentation discipline.
5. Export experience. Prior shipments to Africa, the Middle East, Southeast Asia, or Latin America imply the factory understands packaging, documentation, and after-sales logistics.
6. Warranty clarity. We read warranty terms for exclusions, battery-cycle claims, and lumen-maintenance guarantees. Vague language is a red flag.

The top 10 manufacturers

1. NEWSKY POWER / Commercial Energy Group Limited

NEWSKY POWER, operated by Commercial Energy Group Limited, is based in Qingdao, Shandong, and runs one of the larger solar lighting operations on this list. Its 40,000 m² facility and roughly 400 workers cover solar street lights, garden lights, flood lights, and wall lights, which makes it a practical one-stop supplier for buyers running mixed outdoor lighting programs.

The company’s scale is its main advantage. It holds ISO9001 and lists CE, RoHS, FCC, and GS certifications, and it can produce the documentation volume that large tenders require. The trade-off is that large factories often favor standard catalog models. If you need deep customization of the optical design or battery management system, expect longer development cycles and higher MOQs than you would get from a smaller Yangzhou integrator.

Key details:

• Base: Qingdao, Shandong
• Main products: Solar street lights, garden lights, flood lights, wall lights
• Scale: 40,000 m² factory, ~400 workers
• Certifications: ISO9001, CE, RoHS, FCC, GS
• Typical price band: $35–$110 depending on wattage and battery
• Export focus: Global, strong in Africa, Middle East, and Southeast Asia

Best for: buyers who need high-volume production and multi-product outdoor lighting catalogs.

Not ideal for: small first orders or projects requiring extensive custom firmware or battery management tuning.

2. Jiangsu SOKOYO Solar Lighting

Jiangsu SOKOYO Solar Lighting is a Yangzhou-based manufacturer founded in 2008 that focuses on solar street lights for government and international development projects. Its positioning is closer to a municipal systems supplier than a catalog fixture vendor.

The factory’s strength is project experience. SOKOYO has supplied solar street lighting programs in multiple countries and understands tender documentation, installation support, and after-sales spares. The downside is that project-oriented factories sometimes move slower on small commercial orders. If your quantity is below a few hundred units and you need samples in two weeks, a smaller integrator may respond faster.

Key details:

• Base: Yangzhou, Jiangsu
• Founded: 2008
• Main products: Solar street lights and integrated solar lighting systems
• Scale: Municipal and international project supplier
• Certifications: CE, RoHS; project-specific reports available
• Typical price band: $50–$120

Best for: government tenders, international development projects, and municipal road lighting.

Not ideal for: small e-commerce orders or buyers who need off-the-shelf samples in days.

3. RoadSmart Solar / RoadSmart Co., Ltd.

RoadSmart Solar, the solar lighting arm of RoadSmart Co., Ltd., is headquartered in Shenzhen and markets intelligent solar street lighting with controller and remote-management features. The company claims export experience across 120+ countries.

Shenzhen location matters here. RoadSmart sits close to electronics supply chains, which helps on controller design, smart dimming, and IoT-style monitoring. That makes it a candidate for buyers who want more than a dumb dusk-to-dawn lamp. The risk is the same as with any Shenzhen-based lighting company: verify that the intelligence is backed by real engineering and not just app screenshots. Ask for the controller BOM, firmware version control, and field failure data.

Key details:

• Base: Shenzhen, Guangdong
• Main products: Intelligent solar street lights and smart control systems
• Export footprint: 120+ countries
• Typical price band: $60–$120 for smart models
• Certifications: CE, RoHS; smart-control-specific reports on request

Best for: buyers who need smart controls, remote monitoring, or programmable dimming.

Not ideal for: buyers who want the lowest possible cost for a basic all-in-one unit.

4. LEADSUN

LEADSUN is based in Zhuhai, Guangdong, and specializes in off-grid solar LED lighting for public infrastructure. The company is known in the Australian and New Zealand markets and has also supplied projects in other regions where off-grid public lighting is a priority.

The public-infrastructure focus means LEADSUN tends to spec for longevity and maintenance access rather than lowest first cost. That is a good fit for buyers who care about total cost of ownership over a 5–10 year horizon. If you are buying on Alibaba-style price alone, LEADSUN will likely look expensive. The value shows up in housing design, battery thermal management, and documentation discipline.

Key details:

• Base: Zhuhai, Guangdong
• Main products: Off-grid solar LED street lighting and public infrastructure lighting
• Typical price band: $80–$120 for public-infrastructure models
• Export focus: Australia, New Zealand, Middle East, and Africa

Best for: public infrastructure, off-grid roads, and buyers focused on lifecycle cost.

Not ideal for: price-sensitive consumer or promotional lighting orders.

5. Inlux Solar

Inlux Solar is a Yangzhou-based, factory-direct manufacturer with a 28,000 m² plant, 10 production lines, and a stated capacity of 7,000 sets per month. It focuses on all-in-one and integrated solar street lights for export.

The factory-direct model is the main appeal. Inlux can move from sample to production quickly by controlling its own lines, and its Yangzhou location puts it in the middle of the solar street light supply chain. For buyers sourcing all-in-one solar street lights, Inlux is a candidate worth quoting. As always, verify that the monthly capacity figure translates into real lead times for your specific model and battery configuration.

Key details:

• Base: Yangzhou, Jiangsu
• Scale: 28,000 m², 10 production lines, ~7,000 sets/month capacity
• Main products: All-in-one solar street lights, integrated solar lights
• Typical price band: $45–$100
• MOQ hint: 50–200 sets

Best for: buyers who want factory-direct pricing on standard all-in-one designs.

Not ideal for: buyers needing heavily customized optics or proprietary smart-control platforms.

6. ZGSM

ZGSM is based in Hangzhou, Zhejiang, and manufactures both LED street lights and solar street lights, including split-type and all-in-one designs. The company serves municipal and highway projects and is one of the better-known names in the Zhejiang lighting cluster.

ZGSM’s breadth is useful for buyers who need both AC-powered LED street lights and off-grid solar versions from one supplier. The split-type designs, where the panel and battery are separate from the lamp head, are a better fit for high-wattage highway lighting than compact all-in-one units. For sourcing programs that mix solar and grid-tied LED lighting, ZGSM is worth including in the shortlist.

Key details:

• Base: Hangzhou, Zhejiang
• Main products: LED street lights, split solar street lights, all-in-one solar street lights
• Typical price band: $50–$115
• Applications: Municipal roads, highways, public areas

Best for: municipal buyers needing both solar and AC LED street lights.

Not ideal for: buyers focused only on small residential or decorative solar lights.

7. Yangzhou Beyond Solar

Yangzhou Beyond Solar is another Yangzhou-based system integrator focused on solar street lights for export and domestic projects. It represents the mid-size Yangzhou factory profile: flexible on specs, competitive on price, and reachable for direct negotiation.

The risk with this tier is documentation consistency. Many Yangzhou integrators assemble from a mix of in-house and purchased components, so the same model name can ship with different cells or drivers depending on the batch. If you source here, lock the BOM in writing and hold samples for production comparison.

Key details:

• Base: Yangzhou, Jiangsu
• Main products: Solar street lights and outdoor solar lighting systems
• Typical price band: $40–$95
• MOQ hint: 50+ sets
• Note: operates integrator-style — the registered address is an office tower, so verify factory ownership during the audit

Best for: mid-size distributor orders and buyers who want flexible configuration.

Not ideal for: buyers who need turnkey certification packages for large government tenders without close oversight.

8. Yangzhou Xintong Transport Equipment Group

Yangzhou Xintong Transport Equipment Group Co., Ltd. is not a solar specialist — it is a transport-equipment group operating since 1999 whose main business is traffic signals, signal poles, and road-infrastructure hardware. Solar street lights are one product line within that portfolio, and exports run through its foreign-trade arm, Yangzhou Xintong International Trade.

That heritage cuts both ways. Pole fabrication and road-infrastructure experience are genuinely useful in this category — the pole, flange, and foundation cage are where many street-light tenders go wrong, and a traffic-equipment group handles those well. But the battery and panel side is one line among many, so treat the first order as a qualification run: specify the battery cells, panel, and driver in writing and inspect before shipment.

Key details:

• Base: Yangzhou, Jiangsu
• Founded: 1999 (transport-equipment group)
• Main products: traffic signals, signal and lighting poles, solar street lights
• Trade arm: Yangzhou Xintong International Trade
• MOQ hint: 50+ sets

Best for: projects that combine poles, traffic hardware, and street lights, with the buyer specifying the electrical BOM.

Not ideal for: buyers who need a solar-first manufacturer with a fully documented battery and panel package out of the box.

9. Bluesmart Solar

Bluesmart Solar Lighting Technology is based in Shenzhen’s Bao’an District and specializes in all-in-one smart solar street lights. The company emphasizes integrated product development and offers OEM/ODM services, including lighting design simulations and project documentation.

Bluesmart is a good fit for buyers who want a design-forward all-in-one unit with a longer warranty — the company commonly quotes a 10-year system warranty, which is above the industry average. As with any warranty claim, verify the exact terms, exclusions, and whether the company has local support in your target market before relying on it.

Key details:

• Base: Shenzhen, Guangdong (Bao’an District)
• Main products: all-in-one solar street lights, solar garden lights, solar flood lights
• Strength: integrated design and project documentation support
• Typical price band: $60–$120
• MOQ hint: 50–200 sets

Best for: buyers who want all-in-one smart solar street lights with design support and extended warranty terms.

Not ideal for: buyers who only need the lowest-cost split-system unit for price-only tenders.

10. DEL Illumination

DEL Illumination is a Sino-German solar street light company with a sales and marketing office in Shenzhen and a 10,000 m² manufacturing plant in Dongguan. It focuses exclusively on solar LED street lighting, offering both all-in-one and all-in-two configurations.

The Sino-German structure can be useful for buyers who need European-aligned documentation and design input while manufacturing in China. DEL claims German R&D involvement and Chinese production execution, which may appeal to municipal or NGO-funded projects that value a recognizable European design lineage. Verify where the actual engineering and warranty support sit before committing.

Key details:

• HQ: Dresden, Germany
• Base: Shenzhen office; Dongguan manufacturing plant
• Main products: all-in-one and all-in-two solar LED street lights
• Scale: 10,000 m² plant
• Typical price band: $55–$110
• MOQ hint: 50–200 sets

Best for: buyers who want a Sino-German solar street light supplier with all-in-one/all-in-two options.

Not ideal for: buyers who need the lowest possible unit cost without documentation depth.

How to verify any supplier on this list

Solar street light specifications are easy to inflate on paper. Before you pay a deposit, do the following:

1. Demand battery proof. Ask for photographs of the actual cells showing the brand and capacity, plus a UN 38.3 test report. Weigh the battery pack and compare it to the expected LiFePO4 density.
2. Test the panel. Measure open-circuit voltage and short-circuit current against the datasheet. A 100 W panel that delivers 80 W under standard test conditions is not a 100 W panel.
3. Check housing ratings. IP65 and IK08 should come with test reports, not just claims. Ask for the lab name and report number.
4. Lock the BOM. Write the exact LED chip, driver, battery cell model, controller, and panel supplier into the purchase contract. Solar lighting factories often substitute based on availability.
5. Book a pre-shipment inspection. A pre-shipment inspection should include lux measurement, battery capacity sampling, ingress-check on housing seals, and random cell photography. For buyers in Africa, our Africa buyers sourcing guide covers documentation and logistics pitfalls specific to that market.

For a broader supplier vetting procedure, see our supplier verification guide.

Frequently asked questions

What wattage solar street light is standard for municipal projects?

Most municipal road and street projects use 60 W, 80 W, 100 W, or 120 W all-in-one or split solar street lights, depending on road width and required lux levels. Residential paths and parking lots often use 30–50 W units. Highway or main-road projects may spec 120–150 W with separate solar panels and battery boxes. A useful rule is to ask for the IES file or lux distribution report for the project: wattage alone does not predict illumination. In our LED lighting sourcing work, the most common municipal spec we see is 60–80 W with a 12.8 V LiFePO4 battery and a 100 W or larger monocrystalline panel.

How do I verify real vs inflated solar panel and battery specs?

Start with physical checks: weigh the battery pack and compare it to the expected chemistry density. A 12.8 V 50 Ah LiFePO4 pack should weigh roughly 5–7 kg; if it weighs 2–3 kg, the cells are either ternary lithium or lower capacity than claimed. For the panel, measure actual Voc and Isc under sunlight or a calibrated solar simulator and compare against the datasheet. Demand cell-level photographs showing the brand and capacity printed on each cell, plus a battery UN 38.3 test report for shipping. The biggest fraud in this category is a supplier claiming LiFePO4 while using recycled ternary cells, which shortens cycle life and creates fire risk during transport.

What warranty do Chinese solar street light factories offer?

Most factories quote 2–5 years for the whole system and 3–5 years for the battery, though the actual terms vary widely. A 3-year warranty on the lithium battery and a 5-year warranty on the LED module and controller are common starting points. Be careful with wording: some warranties cover only ‘workmanship’ and exclude water ingress or battery degradation. Ask whether the warranty is backed by a sales contract, what the replacement procedure is, and whether the factory keeps buffer stock overseas. For municipal tenders, buyers often negotiate 5-year full-system coverage with a defined lumen-maintenance threshold, typically 70% of initial output at end of life.

What is the typical container quantity and price for solar street lights?

At factory-exit level, small 20–30 W all-in-one solar street lights typically land at $25–$45 per unit, 60–80 W units at $55–$85, and 100–120 W units at $90–$120. Pricing depends heavily on battery capacity, panel wattage, LED chip brand, and housing material. A 40-foot high-cube container usually holds 180–250 complete 60–80 W units if packed unassembled, or fewer if the poles are included. MOQ from most manufacturers starts at 50–100 units for standard models, with better pricing and customization opening up at 200–500 units. Pole quantities are normally quoted and shipped separately because of length and volume.

Final word

China’s solar street light supply base can deliver excellent value, but only if you verify what is inside the housing. The LED and aluminum shell are rarely the weak point; the battery, the controller, and the panel are. Match the manufacturer to your project type: Yangzhou integrators for flexible distributor orders, large factories like NEWSKY POWER for volume, and Shenzhen/Zhuhai firms like RoadSmart or LEADSUN when smart controls or public-infrastructure durability matter.

If you are sourcing solar street lights for a municipal or distributor project, send us your project lux requirements, target wattage, quantity, and destination market. We will check supplier fit, battery chemistry risk, and certification gaps within 24 hours. Details are on our LED lighting sourcing page.