PROFIBUS Connectors & Components From China
1 resources tagged with "Profibus"
PROFIBUS still runs a large share of installed factory automation, and the physical layer usually lands on B-coded M12 circular connectors rated IP67. Sourcing these from China is straightforward for the connector body, but the catch is the wiring: PROFIBUS-DP needs the correct purple cable, 120-ohm termination, and pin assignment, and Chinese catalog parts sometimes mislabel coding (A vs B vs D). Expect M12 field-wireable connectors at low single-digit dollar prices in volume, with IP67/IP68 sealing as the validation point.
When you source PROFIBUS hardware, the coding key and IP rating are what make or break a deployment — a B-coded M12 won't mate with a D-coded Ethernet port. We verify the actual coding, contact plating, and that the claimed IP67/IP68 rating survives a real ingress test rather than just appearing on the datasheet.
Wiki (1)
FAQ
Which M12 coding does PROFIBUS use?
PROFIBUS-DP fieldbus uses B-coded M12 connectors. Don't confuse this with D-coded (industrial Ethernet) or A-coded (sensor/actuator) variants — they won't mate, and Chinese catalogs sometimes mislabel them.
What IP rating should PROFIBUS connectors meet?
IP67 is the baseline for factory-floor PROFIBUS, with IP68/IP69K available for washdown areas. Validate the rating with an actual ingress test on the first lot rather than trusting the printed spec.
Related Topics
Have a sourcing project in mind?
Tell us what you need. We respond within 24 hours, including weekends.