Type G (BS 1363) Plug Sourcing for UK and Saudi Arabia
1 resources tagged with "Plug"
The Type G plug to BS 1363 is mandatory in the UK and Saudi Arabia, and its defining feature is a mandatory fuse in the plug body — usually 3A or 13A — that a generic Chinese factory will omit unless specified. Mains is 220-240V (Saudi Arabia standardized to 230V/60Hz, the UK 230V/50Hz), so the cordset and fuse rating must match the appliance load. For Saudi shipments the plug and cord also fall under SASO/SABER conformity.
When you specify a Type G plug, call out the fuse rating, cable cross-section, and approval mark (ASTA/BSI for UK). The pitfall is an unfused or wrongly-fused clone that fails certification and is a fire hazard.
Wiki (1)
FAQ
Why does the BS 1363 plug need a fuse?
UK ring-main wiring relies on a fuse inside each plug, typically 3A for small appliances or 13A for high-power ones, to protect the flexible cord. The fuse must match the appliance, not just default to 13A.
What approvals are needed for a Type G plug into Saudi Arabia?
Saudi Arabia requires SASO/SABER conformity for the product including the cordset, and uses 230V/60Hz. Confirm the plug carries a recognized safety mark and the factory can produce SABER documentation.
Related Topics
Have a sourcing project in mind?
Tell us what you need. We respond within 24 hours, including weekends.