Ethernet Connectors and Magnetics from China
1 resources tagged with "Ethernet"
Sourcing Ethernet hardware from China usually means RJ45 jacks — Cat5e/Cat6/Cat6A — and the integrated magnetics that sit behind them, where quality quietly decides whether a port passes IEEE 802.3 return-loss and crosstalk limits. The common failure mode is a jack with under-spec integrated magnetics or weak PoE contacts that overheat at 802.3bt power levels. We check contact plating thickness, magnetics part numbers, and IP67 sealing on industrial M12-to-RJ45 variants.
When you buy an RJ45 jack with integrated magnetics, you're buying a small transformer assembly as much as a connector; cheap units cut corners on the magnetics and PoE current rating. Specify the exact magnetics, the PoE class (802.3af/at/bt), and the sealing grade for outdoor use, then verify with samples.
Wiki (1)
FAQ
What should I verify on Chinese RJ45 connectors before ordering?
Confirm the integrated magnetics part number and turns ratio, the gold plating thickness on contacts (typically 6–30 µin), the PoE current rating, and IP67 sealing for outdoor variants. Return-loss and crosstalk should meet the targeted Cat6/6A category.
What is a typical MOQ and price for OEM RJ45 jacks?
Standard magjacks often run a few cents to under a dollar each depending on category and PoE rating, with MOQs commonly 1,000–5,000 pieces. Industrial IP67 M12 variants cost more and carry higher minimums.
Related Topics
Have a sourcing project in mind?
Tell us what you need. We respond within 24 hours, including weekends.