China Sourcing Agent
Solicită o ofertă

Bicicletă Pliabilă OEM China (16 inch/20 inch, Aluminiu)

Biciclete pliabile OEM din China: roti 16/20 inch, cadru aluminiu 6061. Certificat CE/EN 14764. MOQ 50 unitati.

Specificații
Wheel Size 20 inch (406 ETRTO)
Frame Material 6061 aluminum alloy
Folded Dimensions 80×60×32cm (approx)
Weight 10–13 kg
Gear System 6-speed / 7-speed Shimano Tourney or Altus
Brake Type V-brake (standard) / mechanical disc (upgraded)
Max Rider Weight 120 kg
Certificări
CEEN 14764RoHS

Testul de Oboseală a Cadrului EN 14764: Ce Testează și De Ce Contează

EN 14764 is the EU standard for city and trekking bicycles — it covers frame fatigue, fork fatigue, steering system, wheel, braking performance, and general safety requirements. The frame fatigue test applies a cyclic load simulating pedaling stress over 100,000 cycles at loads equivalent to a 100 kg rider. For folding bicycles, the hinge joint is an additional stress concentration point that must survive the same test without cracking or developing play.

Chinese folding bike factories in the Tianjin and Guangdong clusters vary significantly in frame weld quality: TIG welds should be uniform, fully penetrated, and free of porosity. Our audit service can commission x-ray or dye penetrant inspection on sample frames at the hinge area and rear dropout welds. Factories that cannot provide EN 14764 test reports from an accredited lab (SGS, TÜV, or equivalent) are self-declaring compliance — the risk of return rate or personal injury liability falls on the importer.

Transmisia Shimano vs Generică și Durabilitatea Mecanismului de Balama

Shimano Tourney (7-speed) is the entry point for branded wholesale — index shifting, reliable gear engagement, and widely available replacement parts. Generic Chinese derailleur systems cost $3–5 less per bike but generate complaints about missed shifts and cable stretch within 200 km of use. Our sourcing service helps you identify factories that can document genuine Shimano drivetrain sourcing and avoid the common generic substitution during production.

Folding hinge cycle durability should be tested to a minimum of 5,000 fold/unfold cycles without developing lateral play exceeding 1mm. Our inspection service can perform hinge cycle testing and torque measurement on pre-production samples to verify durability before mass production. Quick-release hinge levers should require at least 15 Nm torque to move when closed — below this, the hinge will open under vibration. For export shipping, a dedicated bicycle carton with foam inserts at the hinge area prevents cosmetic damage in container transit.

Sourcing condus de ingineri Fără marje ascunse Răspuns în 24 de ore

Ai un proiect de sourcing în minte?

Spune-ne de ce ai nevoie. Răspundem în 24 de ore, inclusiv în weekend.