Bandă de Alergat Comercială OEM China

EN 957-6: Standardul Obligatoriu UE pentru Benzile de Alergat Comerciale

EN 957-6 is the specific European standard for treadmills — Part 6 of the EN 957 series covering stationary training equipment. It defines safety requirements including emergency stop cord function, handrail strength, speed accuracy (<5% deviation), and incline accuracy. For commercial gym equipment sold in the EU, CE marking based on EN 957-6 is mandatory. Fitness equipment importers in Germany, France, and the UK require this as a purchase condition.

The standard differentiates between Class H (home use) and Class S (commercial/studio use). Commercial buyers require Class S certification — this involves more demanding durability tests including a 500-hour running test. Our factory audit service verifies that the factory’s CE certificate explicitly states EN 957-6 Class S and is issued by an accredited notified body — not a self-declaration against generic EN 60335-1 electrical safety only.

Puterea Nominală Continuă vs de Vârf și Durata de Viață a Curelei

Motor HP ratings on Chinese treadmills are almost universally quoted at peak (instantaneous) power. A 5 HP peak motor may deliver only 2.5 HP continuously. Continuous HP under sustained load is the honest commercial specification. Test this directly: run the treadmill at 14 km/h with a 100 kg load for 60 minutes and measure actual motor current draw and temperature rise. A properly rated 3 HP continuous motor will remain under 80°C at the motor casing after 60 minutes. Our sourcing service helps you identify factories that provide continuous HP ratings with documented test conditions, not inflated peak figures.

Running belt lifespan is measured in cumulative distance. Commercial grade belts should be rated to a minimum of 80,000 km — the factory should provide a belt wear test report or reference a certified belt supplier. Belt tracking alignment is the most common maintenance issue: verify the belt runs centered on the deck with no side drift over 5 minutes of unloaded operation. Our inspection service can conduct sustained-load motor testing and belt tracking verification on pre-production samples before you commit to a production run.